CubeCell Mac OS
※AT passthrough mode is supported by default. ※ Full support for Arduino development environment (serial number activation is required). ※ Compatible with Windows, Linux, Mac OS three operating systems. ※ Support for LoRaWAN standard protocols Sleep current 3.5uA. ※ Maximum output of LoRa is 22dBm. The measured communication distance between the suburbs is 4.2km. Compaitable with Windows, Linux, Mac OS three operating systems. Support LoRaWAN standard protocol. Support serial AT command. Can be used for network formation or point-to-point communication. Support LoRa IoT project develop. Parameters: MCU: ASR6501 (48 MHz ARM-Cortex-M0+ MCU, 16KB SRAM ) LoRa Chip: Internal integration of Semtech LoRa.
The RadioShuttle Wireless Protocol¶
Cube Cell Mac Os X
Peer-to-peer LoRa wireless protocol software
The standard LoRaWAN protocol is inefficient, does not support direct node to node communication, and is too expensive and complex for many applications. Radioshuttle can send information efficiently and safely between simple LoRa modules.
Secure message transmission.
232 bytes user data maximum, the receipt will be acknowledged, lost data is automatically repeated
Air traffic control
The nodes only send if no LoRa signal is active on that channel. The stations create an automatic network plan, defining which nodes and stations are allowed to communicate, and when. (Planned)
Optimized protocol
Message delivery within 110 ms (SF7, 125 kHz, free channel provided)
Messages only require 2 x 12 bytes (protocol overhead)
Narrow bandwidths allow for a longer range
Automatic transmitting power adjustment saves energy and reduces traffic on the neighboring stations
Support multiple MCU boards
The Turtle board
The ECO Power board
The LongRa board
Supported multiple systems
Arduino, Arduino Zero or newer
ARM Mbed OS, supported MCUs (e.g. STM32L0, STM32L4)
Linux (Raspberry PI/Orange PI planned)
Know more about RadioShuttle Protocol please click:The RadioShuttle Wireless Protocol.
RadioShuttle STM32 Utility¶
Cube Cell Mac Os Catalina
“RadioShuttle STM32 Utility” is a special utility which easily allows uploading and downloading software to/from RadioShuttle STM32-compatible boards, via USB using the DFU protocol. The utility can be used either from a command line from Mac, Windows, and Linux, or in a GUI from Mac and Windows computers. Software can be uploaded to/downloaded from STM32 MCUs. It has been designed to be used with RadioShuttle compatible boards which obtained a valid license (code) during the manufacturing process.
Cube Cell Mac Os 11
System requirements
Windows: Windows 7 or higher
Mac: macOS 10.9 or higher
Linux: Linux kernel 2.6.16 or higher,glibc 2.4 or higher
Know more about RadioShuttle STM32 Utility please click: RadioShuttle STM32 Utility